|
|
|
Who's Online
There currently are 5956 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
ADJUSTMENT INSTRUCTIONS
1. Application Object
These instructions are applied to all of the color TV, MC-05HA chassis. 8) After checking �40�, Click the Erase Flash button.
2. Notes
(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production. (3) The adjustment must be performed in the circumstance of 25±5°C of temperature and 65±10% of relative humidity if there is no specific designation. (4) The input AC voltage of the receiver must keep rating voltage in adjusting. (5) The receiver must be operated for about 15 minutes prior to the adjustment.
9) Double click �Edit Window�.
3. Soft ware download
1) Connect JIG to P004 of Digital Board. 2) Connect SCL line of JIG Switch to Ground. 3) Turn on JIG and supply 6V to Digital Board. Terminate the SCL of clause 2) by using Switch. 4) After termination of SCL line, wait for 3 second. 5) Execute �vct69xyp_main_graphic.vi2c� program. 6) Click the TVT button.
10) Click the file select button of Name to select file.
7) Double click right check box of �Boot loader Version� line, and then check to change to 40 from 0.
11) Select necessary file.
-8-
|
|
|
> |
|
